- Auto Rotation
- Settings Guide
- ThingiBrowser
- Preferences -> General -> __YOUR_LANGUAGE__ (e.g.: English)
- Preferences -> General -> __YOUR_CURRENCY__ (e.g.: €)
- Preferences -> General -> Theme -> Ultimate Dark
- Preferences -> General -> Slice automatically
- Preferences -> General -> Uncheck "Send (anonymous) print information"
- Preferences -> Printers -> __ADD_YOURS__ (e.g.: Ender 3 Pro)
- Preferences -> Materials -> __YOUR_MATERIAL__ (e.g.: Generic PLA) -> Fill "Fialement Cost" and "Fialement Weight"
- (Shell) Wall thickness = 3 x (Quality) Rounded line width
- (Shell) Wall Line Count -> Increase from 2 to 6 if you want a more resistant object
- (Support) Horizontal expansion -> Increase to 1 (if necessary)
- (Support) Support Z Distance -> Increase if your support material is difficult to break
/!\ If you need adhesion (like a cylinder or a very tall, thin backing), simply change your "Build Plate Adhesion Type" to "Edge"!
/!\ You can change "Support X/Y Distance", "Support Overhang Angle" and "Minimum Support Area" when the support is not good (too much, not in the right place , above vacuum, etc.) everywhere!
/!\ You can also block unnecessary media, with the built-in tool that generates cubes!
- Extensions -> Post processing -> Modify G-Code
- Pause height (or Layer No): __YOUR_HEIGHT__ (or __YOUR_LAYER_NUMBER__)
- Park Print head X: 20mm
- Park Print head Y: 150mm
- Retractation Y: 8mm
- Retractation speed: 50mm/s
- Extrude speed: 3.3333mm/s
- Redo layers: 0
- Standby temperature: 30 °C
/!\ G-Code settings are not in the project/profile, but will stay in Cura!
- C:\Users\Canan\AppData\Roaming\cura\4.4\
/!\ Ultimaker Cura 4.4 is my version, but yours may be newer!
We get, a print cost of only:
- Full hours: 0,1921 €/Kwh (so in the day)
- PLA coils: 12.99 €/Kg (so in promo)
For example, if you want to print the drawer module for the Ender 3 Pro :
- Filament: 12.99 € / 1000 g = 0.0129 €/g
- Electricity: 350 w * 0.1921 €/Kwh / 1000 w = 0.067235 €/h
- Thingiverse - Front_Box_4_Ender_3_Pro_Rev_B: https://www.thingiverse.com/thing:3162464
- 116g (38.84m): 116g = 1.50€
- 11h17: 11.3h = 0.75€
/!\ You can reduce more if you use a optimized print profil (cf: 2.)!
-> Total: 2.25€
Of course, it will cost even less during the night and weekend (depending on the package), because if we take a normal basis in this case, we only have: 0.1359 €/KwhFor example : Latex-free nitrile dishwashing gloves (your size)
- Neoprene
- Nitrile
- Polyethylene / vinyl alcohol and ethylene / polyethylene multilayer (PE / EVAL / PE)
- Polyvinyl chloride (PVC)
- Viton®
- Auto Rotation
- Settings Guide
- ThingiBrowser
- Préférences -> Général -> __VOTRE_LANGUE__ (e.g.: English)
- Préférences -> Général -> __VOTRE_MONNAIE__ (e.g.: €)
- Préférences -> Général -> Thème -> Ultimate Dark
- Préférences -> Général -> Slice automatically
- Préférences -> Général -> Décoché "Send (anonymous) print information"
- Préférences -> Imprimantes -> __AJOUTER_LES_VOTRES__ (e.g.: Ender 3 Pro)
- Préférences -> Matérials -> __VOTRE_MATERIEL__ (e.g.: Generic PLA) -> Remplissez "Fialement Cost" et "Fialement Weight"
- (Shell) Épaisseur des parois = 3 x (Qualité) Largeur de ligne arrondie
- (Shell) Wall Line Count -> Augmentez de 2 à 6 si vous voulez un objet plus résistant
- (Support) Expansion horizontale -> Augmenter à 1 (si nécessaire)
- (Support) Support Z Distance -> Augmentez si votre matériel de support est difficile à casser
/!\ Si vous avez besoin d'adhérence (comme un cylindre ou un support mince de très grande hauteur), changez simplement votre "Type d'adhésion de plaque de construction" en "Bord" !
/!\ Vous pouvez changer "Support X/Y Distance", "Support Overhang Angle" et "Minimum Support Area" lorsque le support n'est pas bon (trop, pas au bon endroit, au-dessus de vide, etc.) partout !
/!\ Vous pouvez également bloquer les supports inutiles, avec l'outil intégré qui génère des cubes !
- Extensions -> Post processing -> Modify G-Code
- Pause height (ou Layer No): __VOTRE_HEIGHT__ (ou __VOTRE_NOMBRE_DE_LAYER__)
- Park Print head X: 20mm
- Park Print head Y: 150mm
- Retractation Y: 8mm
- Retractation speed: 50mm/s
- Extrude speed: 3.3333mm/s
- Redo layers: 0
- Standby temperature: 30 °C
/!\ Les paramètres G-Code ne sont pas dans le projet/profil, mais resteront dans Cura !
- C:\Users\Canan\AppData\Roaming\cura\4.4\
/!\ Ultimaker Cura 4.4 est ma version, mais la vôtre peut être plus récente !
Nous obtenons, un cout d'impression de seulement :
- Heures pleines : 0,1921 €/Kwh (donc dans la journée)
- Bobines de PLA : 12.99 €/Kg (donc en promo)
Si on souhaite imprimé par exemple le module du tiroir pour la Ender 3 Pro :
- Filament : 12.99 € / 1000 g = 0.0129 €/g
- Electricité : 350 w * 0.1921 €/Kwh / 1000 w = 0.067235 €/h
- Thingiverse - Front_Box_4_Ender_3_Pro_Rev_B : https://www.thingiverse.com/thing:3162464
- 116g (38.84m) : 116g = 1.50€
- 11h17 : 11.3h = 0.75€
/!\ Vous pouvez réduire davantage si vous utilisez un profil d'impression optimisé (cf: 2.) !
-> Total : 2.25€
Bien sur, cela coutera encore moins cher durant la nuit et les weekend (suivant le forfait), car si on prend une base normale dans ce cas, nous avons seulement : 0,1359 €/KwhPar exemple : Gants de vaisselle en nitrile sans latex (à votre taille)
- Néoprène
- Nitrile
- Multicouche polyéthylène/alcool de vinyle et d'éthylène/polyéthylène (PE/EVAL/PE)
- Polychlorure de vinyle (PVC)
- Viton®